Moteur MAN
≈ 1,16 $US
Hörsching
Si vous décidez d'acheter un véhicule ou du matériel à bas prix, assurez-vous que vous communiquez avec un vendeur réel. Cherchez autant d'informations sur le propriétaire que possible. Un escroc peut se faire passer pour une société réelle. En cas de doute, contactez-nous en utilisant le formulaire de commentaires afin que nous effectuions un contrôle supplémentaire.
Avant d'effectuer un achat, étudiez attentivement plusieurs offres de vente afin de connaître le coût moyen du modèle de véhicule ou d'équipement que vous avez choisi. Si le prix de l'offre qui vous intéresse est très inférieur aux offres similaires, réfléchissez bien. Une différence de prix considérable peut indiquer la présence de défauts cachés ou une tentative d'escroquerie.
N'achetez pas de produits dont le prix est trop différent du prix moyen de produits similaires.
Ne consentez pas à payer une caution ou une avance douteuse. En cas de doute, n’hésitez pas à demander des précisions, des photos et des documents supplémentaires, vérifier l'authenticité des documents ou encore poser des questions.
C'est l'arnaque la plus répandue. Des vendeurs malhonnêtes peuvent demander une avance sur le montant total pour « réserver » votre achat. De cette manière, ils peuvent recueillir un montant considérable, puis disparaître.
- Faire un prépaiement sur la carte
- N'effectuez pas de prépaiement sans établir de documents confirmant le transfert d'argent si le vendeur vous semble suspect au cours de vos échanges.
- Transfert de l'argent sur le compte séquestre
- Méfiez-vous de ce genre de demandes, il est très probable que vous soyez en train de communiquer avec un fraudeur.
- Virement sur le compte d'une société avec un nom similaire
- Soyez vigilant(e), des fraudeurs peuvent se faire passer pour des entreprises connues en introduisant des modifications mineures dans le nom. Ne transférez pas d'argent en cas de doute sur le nom de l'entreprise.
- Substitution de ses propres coordonnées dans la facture d'une entreprise réelle
- Avant d'effectuer le virement, vérifiez que les coordonnées indiquées sont exactes et qu'elles appartiennent à l'entreprise indiquée.
Coordonnées du vendeur
+358 50 53...
Montrer
+358 50 5345498
+358 9 231...
Montrer
+358 9 23165797
Autriche 
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Autriche, Hörsching
Finlande, Helsinki
Royaume-Uni, Dudley
Pologne, Izabelin-Dziekanówek
Pologne, Izabelin-Dziekanówek
Pologne, Izabelin-Dziekanówek
Chine, Jining
Chine, Guangzhou
Chine, Jining
Chine, Guangzhou
Roumanie
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor
2x
Man D2862LE476 V12-1900 HP marine engines sale , surplus new units
1397 kW (1900HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
2155 Standard oil carter
2302 Electrical oil pump for carter
2155 Lubrificant oil pump (versione standard]
Engine oil filters
0293 Exhaust gas compensator
0304 Exhaust elbow with vertical exhaust
0056 Water cooled exhaust manifold
3901 Heat exchanger (titanium plate] and raw water pump, with compensation tank, sized for a maximum salt water temparture of32°C
0256 Raw water pump
— Rigid supports
— Oil pressure transmitter in mA
— Gearbox oil low pressure alarm
— Gearbox oil high temperature alarm
7410 Terminal board with wiring, with starting relay 24 V, mounted with engine display parameters and start/stop buttons
Connection wiring between engines (MMDS CAN Bus] mt. 5
— Color LCD - Display Unit (2 units] - display 7" per plancia, inclusi sensori
7606 Terminal block- bridge display wiring connection - 30 mt
7631 Electrical wiring for engine starting (MMDS CAN Bus] 20 mt.
1209 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
0015 Fuel filters
2500 Air filters
4850 Engine fitted PTO for attachment of a hydro-pump (max couple 180 Nm available]
0253 Carter protezione cinghie
8505 IMO Technical documentation
9006 Service documentation on CD-Rom
3705 Bench test documentation with crankshaft and conrods certification
0492 Engine white painted (RAL 9010]
0411 Land transportation packing with Cover motor